Request a Quote
Book a VIP Consultation

Smart LED


When it comes to lighting, it’s hard to beat the sun for endlessly bright, consistent lighting. The only downside is that it goes down each night, requiring homeowners to turn on electric lights to see after dark. The Solatube Smart LED System solves this problem using SunSense Technology, which blends LED lighting with sunlight to seamlessly illuminate rooms day and night. It’s the system that creates light in a smarter way.


Raybender® 3000

A patented daylight-capturing dome lens that:

  • Redirects low-angle sunlight for maximum light capture
  • Rejects overpowering summer midday sunlight
  • Provides consistent daylighting throughout the day



An innovative in-dome reflector that:

  • Redirects low-angle winter sunlight for maximum light capture
  • Increases light input for greater light output
  • Delivers unsurpassed year-round performance


Infinity Tubing

Tubing made of the world’s most reflective material that:

  • Delivers 99.7% * specular reflectivity for maximum sunlight transfer
  • Provides the purest color rendition possible so colors are truer, brighter
  • Allows for run lengths over 30 feet to deliver sunlight to lower floors


SunSense Technology

A patented control center that:

  • Continually assesses light levels and determines when supplemental light is needed
  • Automatically triggers LEDs to provide optimal light output
  • Seamlessly transitions from waning daylight to radiant LED light
* Specular reflectance greater than 99% with wavelength specific reflectance up to 99.7% for the visible spectrum

SunSense Technology: A Revolution in Lighting

High-performance Amplifier

Enclosed in a specially designed flared housing, the high- performance Amplifier features a patented design that utilizes16 highly reflective facets. These facets redirect light downward toward the Decorative Fixture at the most effective angle, maximizing light output for powerful performance.

Daylight Sensor

A Daylight Sensor continually monitors light levels within the tube and activates the LEDs when light levels reach a minimum threshold. It also deactivates the LEDs when sufficient daylight is present.

Light Optimization Lens

A patented Light Optimization Lens allows daylight to pass through and directs the light produced by the LEDs toward the Decorative Fixture.

Light Emitting Diodes (LEDs)

Four 3000K LEDs with an average 35 lumens / watt output provide ultra-energy efficient lighting designed to last up to 20 years. In addition, they complement existing lighting and deliver 80 CRI for a highly accurate display of colors.

Easy Connect Panel and Driver

A housing assembly designed with unique connectors for the driver, Secondary System, and Occupancy Sensor ensures easy installation.

Occupancy Sensor

The Occupancy Sensor detects occupants and automatically triggers LEDs when light levels are low. Can be turned on or off when connected to a wall switch.

Product Selection Guide


  • LED_Primary_Thumb_6
  • LED_Secondary_Thumb_3

Roof Flashings

  • No_Pitch_Thumbnail_3
  • Pitched_Thumbnail_4
  • Universal_Thumbnail_3




  • Dimmer_Thumb_5
  • LED_Occ_Sensor_Thumb_3

Occupancy Sensor

If you thought the Solatube Smart LED System couldn’t get any smarter, think again. The optional Occupancy Sensor maximizes energy efficiency by preventing the LEDs from triggering unless an underlit area is occupied. If movement is present when light levels are low, the Occupancy Sensor will allow the LEDs to activate. If not, they remain dormant. Once on, the system continues to assess light levels and will turn off the LEDs automatically when enough daylight is present. With the Occupancy Sensor, you’ll save on electricity and never have to worry about leaving the lights on.


  • Tubing_Thumb_6
  • Tubing_90_Thumb_6
  • Turret_Ext_Thumb_6
  • Insulator_Thumb_6

Testimonials View All

“Showing the installations off to friends and neighbors! (But I keep giving my wife heck for not turning off the light!)”

C.C. Edmonton